Intermec 700 Series User Manual page 197

Scanner Support
Bar Code ID
Symbology Character
Plessey P
Standard 2 of 5 R
(2-bar start/stop)
Standard 2 of 5 S
(3-bar start/stop)
Telepen B
UPC/EAN E
IMPORTANT: The "symbology_id" character letter must be uppercase for the above definitions.
6-64 700 Series Color Mobile Computer User's Manual
Modifier Characters (Continued)
0 No options specified. Always transmit 0.
0 No check character validation.
1 Modulo 7 check character validated and transmitted.
3 Modulo 7 check character validated but not transmitted.
0 No options specified. Always transmit 0.
0 Full ASCII mode
1 Double density numeric only mode
2 Double density numeric followed by full ASCII
4 Full ASCII followed by double density numeric
Consider UPC/EAN symbols with supplements as two separate symbols.
The first symbol is the main data packet, and the second symbol is the 2
or 5 digit supplement. Transmit these two symbols separately, each
with its own symbology identifier. Provision is made for the option of
transmitting both symbols as a single data packet.
0 Standard data packet in full EAN format (13 digits for EAN-13,
UPC-A, and UPC-E; does not include add-on data).
1 Two digit add-on data only.
2 Five digit add-on data only.
3 Combined data packet comprising 13 digits from EAN-13, UPC-A,
or UPC-E symbol and 2 or 5 digits from add-on symbol.
4 EAN-8 data packet
SECTION 6