Write Encryption - Intermec 700 Series User Manual

Control Panel Applets

Write Encryption

Sets the packet-level mode of security for SNMP read/write requests. If you en-
able write encryption, all SNMP packets that are received with the read/write
community string have to be encrypted or the packet will not be authorized. You
need to use software from Intermec Technologies that supports encryption.
" NOTE:
To enable security encryption, you also need to set the Security Encryption Key (page A-47).
Action:
SNMP OID:
Options:
A-46 700 Series Color Mobile Computer User's Manual
Tap the Write Encryption parameter, then select an option to change this
parameter setting.
1.3.6.1.4.1.1963.10.5.1.5.0
1 On SNMP packets must be encrypted
2 Off SNMP packets do not have to be encrypted (default)
APPENDIX A