Codabar - Intermec 700 Series User Manual

APPENDIX A

Codabar

Codabar is a self-checking, discrete symbology.
Action:
SNMP OID:
Options:
" NOTE:
If "1" is selected for Bar code length, then Minimum length is entered.
If "2" is selected for Bar code length, then Fixed length 1, Fixed length 2, or
Fixed length 3 is entered.
Tap (+) to expand the Codabar parameter, select a setting to be changed,
then select an option from the drop-down list to change this setting.
1.3.6.1.4.1.1963.15.3.3.1.1.5.1
Decoding
Start/Stop
CLSI library system (Not supported when using an imager):
Check digit
Bar code length
Minimum length
Fixed length 1
Fixed length 2
Fixed length 3
0 Not active (default)
1 Active
0 Not transmitted (default)
1 abcd transmitted
2 ABCD transmitted
3 abcd/tn*e transmitted
4 DC1–DC4 transmitted
0 Not active (default)
1 Active
0 Not used (default)
1 Transmitted
2 Not transmitted
0 Any length
1 Minimum length (default)
2 Fixed lengths
003–254 Minimum length 3–254 (6)
000–254 Fixed length 0–254 (0)
000–254 Fixed length 0–254 (0)
000–254 Fixed length 0–254 (0)
700 Series Color Mobile Computer User's Manual
Control Panel Applets
A-7