Intermec 700 Series User Manual page 94

SECTION 4
Security
Use the Security page to set this profile as read-only or to enable WEP (Wired
Equivalent Privacy) encryption. Click OK to return to the Profiles page. The
following securities are available from the Security Method drop-down list.
Note that the last three methods are available if you have purchased the security
package. Contact your Intermec Representative for more information.
"
"
"
"
802.11 WEP Encryption:
WEP keys are only needed if they are expected by your clients. There are two
types available: 64-bit (5-character strings, 12345) (default) and 128-bit (13-char-
acter strings, 1234567890123). These can be entered as either ASCII (12345) or
Hex (0x3132333435).
To enter WEP keys, select "802.11 WEP Encryption" from the Security Method
drop-down list. Select a data transmission key from the Data TX Key drop-
down list near the bottom of this screen, then enter the encryption key for that
data transmission in the appropriate Key # field.
802.11 WEP Encryption
802.1x TLS (page 4-8)
802.1x TTLS (page 4-9)
LEAP (page 4-9)
700 Series Color Mobile Computer User's Manual
Network Support
4-7