Pre-Maintenance Preparations - Fujitsu iScanner fi-6010N Operator's Manual

8.7

Pre-Maintenance Preparations

Before sending the scanner for maintenance, the user data store and system settings should be
backed up. Refer to the following sections for details:
"Backing up the User Data Store"
165)"
"4.10.2 Maintaining the System Settings" (page 171)
After backing up the user data store and system settings, the original data may be deleted. Refer to
the following sections for details:
If the hard disk is replaced, all settings will revert to their factory default values.
"Clearing the User Data Store" (page 170)
(page
"Clearing the System Log" (page 164)
(page 171)
ATTENTION
478
165)"
The user data store may contain private information such as e-mail
addresses or fax numbers, so care should be taken when managing such
data.
from "4.10.1 Maintaining the User Data Store" (page
from "4.10.1 Maintaining the User Data Store"
from "4.10.2 Maintaining the System Settings"