Fujitsu iScanner fi-6010N Operator's Manual page 617

Code
12040001 Cannot find the network folder
path.
12040002 Access to network folder was
refused.
12040003 File already existed, so data
could not be saved.
12040005 Network is busy. Try again
later.
Message
Try the following:
For saving to the FTP server network
folder, try the following:
Try the following:
To overwrite the existing file, on the
"Save" screen, set "Overwrite old files?" as
"Yes", and try again.
Try again later.
fi-6010N Network Scanner Operator's Guide
Action
Check that the LAN cable of the scanner
and file server is connected properly.
Check that the file server is working
properly.
Contact a system administrator to check
that the scanner IP address and network
folder settings are correct.
"8.3 Network Connection
Troubleshooting" (page 458)
When creating a folder, if the name of
the folder to be created is already used
by a file in the save location network
folder, it cannot be created. Change the
name of the file, or change the file name
settings.
Contact a system administrator to check
whether or not read or write access to
the FTP server network folder is
permitted for the currently logged in
user or authenticated user.
Check if the file attribute has been set as
hidden.
Check that the target file to be
overwritten is not used, and try again.
Contact a system administrator to check
whether or not access to the network
folder is permitted for the currently
logged in user or authenticated user.
Check if the file attribute has been set as
hidden.
E
579