Fujitsu iScanner fi-6010N Operator's Manual page 594

Code
110D0002
110D000F
110D0004
110D0005
110D0006
556
Message
Cannot connect to the LDAP
server.
Cannot connect to the LDAP
server. Check that the LDAP
access settings are correct and
that the LDAP server is running
and accessible.
Access to network folder was
refused.
Number of network path
connections has reached the
maximum allowed. No more
may be specified.
Invalid LDAP Search Base
format.
Action
Try the following:
The network settings may not be valid.
Contact a system administrator to have
the network settings checked.
"8.3 Network Connection
Troubleshooting" (page 458)
The server may not be working. Contact
a system administrator to have the server
status checked.
If using SSL communication when
connecting to the LDAP server, contact
an administrator to check if the server
certificate, issued from a root
certification authority, is installed on the
LDAP server.
Enter a valid user name and password.
Try the following:
The network settings may not be valid.
Contact a system administrator to have
the network settings checked.
"8.3 Network Connection
Troubleshooting" (page 458)
The server may not be working. Contact
a system administrator to have the server
status checked.
If using SSL communication when
connecting to the LDAP server, contact
an administrator to check if the server
certificate, issued from a root
certification authority, is installed on the
LDAP server.
Enter a valid user name and password.
Contact a server administrator to find out if
an access permit has been set.
Close unneeded network connections, then
try specifying the desired network path
again.
Contact a system administrator to have the
LDAP search base format corrected.
"4.7.8 Setting the Login LDAP Server"
(page 100)