Fujitsu iScanner fi-6010N Operator's Manual page 137

Network scanner
Hide thumbs Also See for iScanner fi-6010N:
Table of Contents

Advertisement

3. Use the "FTP Proxy Server" option to set whether or not a proxy server is used for
FTP server connection.
The default setting is [Off].
Select [On] to enable FTP connection via a proxy server.
1
Enter the proxy server IP address, host name, or FQDN in the "Address" input
field.
For an IP address
The following format should be used xxx.xxx.xxx.xxx (xxx is a value from
0 to 255).
For a host name or FQDN
Up to 255 characters may be entered.
2
Enter a port number for the proxy server, from 1 to 65535, in the "Port Number"
field.
Select [Off] to enable direct FTP connection (not via a proxy server).
This "FTP Proxy Server" setting must be set to [On] if the "Proxy" setting for
any FTP server network folder is set to [On]. If the "FTP Proxy Server" set-
ATTENTION
ting is set to [Off], FTP server network folders cannot be used.
For details of how to set an FTP server folder as a proxied network folder,
refer to
4. Use the "SharePoint Proxy Server" option to set whether or not a proxy server is used
for SharePoint server connection.
The default setting is [Off].
Select [On] to enable SharePoint connection via a proxy server.
1
Enter the Central Admin Server IP address, host name, or FQDN in the "Address"
input field.
For an IP address
The following format should be used xxx.xxx.xxx.xxx (xxx is a value from
0 to 255).
For a host name or FQDN
Up to 255 characters may be entered.
2
Enter a port number from 1 to 65535, to be used by the scanner to communicate
with the Central Admin Server.
3
Any IP addresses, host names, or FQDN that are to accessed directly (not via the
proxy server) should be entered in the "Exceptions" field.
Multiple addresses must be separated using semi-colons (";").
"*" may be used as a wildcard character.
An IP address may be followed by a "/" and then a subnet mask.
Select [Off] to enable direct SharePoint connection (not via a proxy server).
5. Press the [OK] button.
The proxy server is set.
4.7 Using the Network Settings Menus
"4.7.14 Setting the Network Folders" (page
fi-6010N Network Scanner Operator's Guide
132).
99
4

Advertisement

Table of Contents
loading

Table of Contents