Fujitsu iScanner fi-6010N Operator's Manual page 112

HINT
5. Press the Seq. Number [List] button.
The sequence number list appears.
6. Select a sequence number.
The sequence number is added to the end of a file name.
The default value is "Min 3 digit Seq. Number".
If "No Sequence Number" is selected, a sequence number is not added.
ATTENTION
74
If multiple buttons are selected, file names are created in the following
order.
Prefix
Scanner Name
User Name
Date
Time
Select the Delimiter [List] button to change the delimiter.
For example, for prefix "file", scanner name "Scanner", user name "user",
date "12312009", time "12:00:30", delimiter "_", the file name is
"file_Scanner_user_12312009_120030".
If the file name which exceeds the maximum sequence number possible
already exists in the target folder for saving, the sequence numbers are
not added correctly.