Fujitsu iScanner fi-6010N Operator's Manual page 598

Code
12010100
12020001
12020002
560
Message
Error: e-mail could not be sent.
Scanned data size exceeded
maximum size allowed for
sending by fax.
Could not connect to server
when sending fax.
Action
Try the following:
A message returned from the server is
attached after the message displayed on
the left. Contact a server administrator
to deal with the error.
If the [e-Mail address of user] option
button is selected for [To] and/or
[From], an error will occur during the
job process in the following cases:
If the currently logged in user does
not have an e-mail address
If the currently logged in user is
using the guest account
In this case, specify a user with a
registered e-mail address and perform
the job sequence.
Try the following:
Reduce the number of pages to be
scanned and send the fax in separate
parts.
Select a higher compression level, and
try again.
"6.9.9 Compression" (page 387)
If the problem persists, contact a system
administrator to check the "Maximum
Attachment Size" setting.
"4.7.11 Setting the e-Mail Server (SMTP
Server)" (page 116)
Try the following:
Check that the LAN cable of the scanner
and SMTP server is connected properly.
Contact a system administrator to check
that the scanner IP address, SMTP
server and fax server settings are
correct.
"8.3 Network Connection
Troubleshooting" (page 458)
Contact a system administrator to check
that the SMTP and fax servers are
working properly.