8.6
Pre-Maintenance Preparations
Before sending the scanner for maintenance, the user data store and system settings
should be backed up.
"Backing up the User Data Store" (page 175)
Data Store" (page 174)
"4.15.2 Maintaining the System Settings" (page 178)
After backing up the user data store and system settings, the original data may be
deleted. Refer to the following sections for details.
If the hard disk is replaced, all settings will revert to their factory default values.
"Clearing the User Data Store" (page 177)
Store" (page 174)
"To reset system settings to factory defaults, press the [Reset] button for [Reset
system settings to factory defaults and clear logs.]." (page 181)
Maintaining the System Settings" (page 178)
The user data store may contain private information such as e-mail addresses or fax
numbers, so care should be taken when managing such data.
8.6 Pre-Maintenance Preparations
from
"4.15.1 Maintaining the User
from
"4.15.1 Maintaining the User Data
464
from
"4.15.2