Fujitsu iScanner fi-6010N Operator's Manual page 115

3. Select a file name format.
By default, "Scanner Name" + "Date" + "Time" is entered.
If the [Prefix] button is selected
The character string entered in the input field is used as the file name.
This may be up to 128 characters long, excluding the following symbols.
\ / : * ? " < > |
If the [Scanner Name] button is selected
The scanner name is used as the file name.
If the [User Name] button is selected
The name of the currently logged in user is used as the file name.
If the [Date] button is selected
The date of the scan is used as the file name. Select the Date Format [List] button to
change the date format.
If the [Time] button is selected
The start time of the scan is used as the file name.
If multiple buttons are selected, file names are created in the following order.
HINT
Prefix
Scanner Name
User Name
Date
Time
Select the Date Format [List] button to change the date format. Select the
Delimiter [List] button to change the delimiter.
For example, for prefix "file", scanner name "Scanner", user name "user",
date "12312009", time "12:00:30", delimiter "_", the file name is
"file_Scanner_user_12312009_120030".
4. Press the Date Format [List] button.
The date format list appears.
5. Select a date format.
The date format is used for the file name when attaching scanned data to an e-mail.
6. Press the Delimiter [List] button.
The delimiter list appears.
7. Select a delimiter.
The delimiter is used for the file name when attaching scanned data to an e-mail.
If "None" is selected, a delimiter is not added.
8. Press the [Preview] button.
The specified file name format is displayed to the right of the [Preview] button.
9. Check the file name format.
10. Press the [OK] button.
The file name format is set.
4.6 Using the System Settings Menus
fi-6010N Network Scanner Operator's Guide
4
77