Fujitsu iScanner fi-6010N Operator's Manual page 392

4. Press the [OK] button.
This returns you to the "Save" screen.
HINT
5. In the "Save as:" field, enter a file name for the scanned data to be saved.
File names may be up to 128 characters long. \ and / are used as folder separator characters.
The following symbols cannot be used.
: * ? " < > |
The default setting is the file name set on the administrator "File Names (Save)" screen.
For more details, refer to
(page
ATTENTION
354
User authentication may sometimes be required to access the file server.
If authentication is required, the "F
appears. The authentication procedure is as follows.
1. Enter a "User Name" and "Password" for the file server.
Passwords are case sensitive.
2. Press the [OK] button.
"4.6.9 Setting a File Name Format for When Saving Scanned Data"
72).
The following file names cannot be used:
CON
PRN
AUX
CLOCK$
NUL
COM0 to COM9
LPT0 to LPT9
If the file format is changed in "Scan Settings", the file name set on
the "File Names (Save)" screen is reset in the "Save As" field.
ile
Server Authentication" screen