Fujitsu iScanner fi-6010N Operator's Manual page 642

Code
7A040014
7A040015
7A040016
7A040017
604
Message
Backup file already exists.
Backup folder specification is
invalid.
Server is busy. Try again later.
Backup failed.
Action
A file or folder exists in the backup folder.
Specify an empty folder.
If a folder which does not exist is specified,
it will be created.
This error message is output in the
following cases. After checking the error,
run the command again.
The backup folder specified in the
parameter for the restore command does
not have write access.
The specified backup folder name
already exists as a file.
The backup file full path is longer than
128 bytes.
This message appears if the backup/restore
command is executed during an update call
on the Central Admin Server.
Wait until the update call is finished, and
try again.
If this message appears with auxiliary code
[7A041012], free disk space may be
insufficient. Ensure that there is enough
free disk space available, and try again.
If this message appears with auxiliary code
[7A041015], it is possible that the database
file used in the Central Admin Server is
being used with a software other than the
Central Admin Server software. Stop using
the database file and try again.
If this message appears without auxiliary
code, the contents of the problem are
shown in the following format.
...
Problem details
...
If this message appears frequently with
auxiliary code other than those mentioned
above, contact your FUJITSU scanner
dealer or an authorized FUJITSU scanner
service provider.