Fujitsu iScanner fi-6010N Operator's Manual page 201

3. Select the log you wish to view.
The details of the selected log are displayed.
Pressing the [OK] button returns to the "System Log" screen.
On the "System Log" screen, pressing the [Refresh] button updates the
HINT
information shown.
The following information is shown.
Info Info options
Date MM/dd/yyyy
dd/MM/yyyy
yyyy/MM/dd
Time hh:mm:ss
Type Information
Error
Warning
Message Message Code
Message Body
4.9 Using the Operation Logs Menus
Details
Shows the date of each operation (format specified on the
Date/Time screen is used).
For more details, refer to
(page 64).
Shows the system log time record.
Shows information about the system.
No action required.
Shows the system error.
The same information will be sent to the e-mail address
set in "4.7.16 Setting the Destination for Alert Notifica-
tions" (page 149).
To deal with errors, refer to
Log Messages" (page 524).
Shows the system warning.
The same information will be sent to the e-mail address
set in "4.7.16 Setting the Destination for Alert Notifica-
tions" (page 149).
To deal with errors, refer to
Log Messages" (page 524).
For information about messages, refer to
Log Messages" (page 518).
fi-6010N Network Scanner Operator's Guide
"4.6.5 Setting the Date/Time"
"E.1.3 Alert Monitor System
"E.1.3 Alert Monitor System
"E.1.2 System
4
163