Scanner Operating Status - Fujitsu iScanner fi-6010N Operator's Manual

Icon/Mark
ATTENTION

■ Scanner Operating Status

Online (In use)
Shows the number of scanners that are currently operating. The number of scanners with
logged in users are shown in ( ).
Offline
Shows the number of scanners that are currently turned off or in standby mode.
Unreported
Shows the number of scanners whose operating status is not reported.
Consumable Alerts
Shows the number of scanners whose consumable parts are soon to pass or have passed
their rated lifetime already.
Error
Shows the number of scanners in which an error has occurred. The error mark (
shown to indicate the scanner with an error.
282
Status
Error Shown if the following errors occur in a scanner.
Scanner monitoring error (messages with an error code
from 81000001 to 81000012)
For details of errors, refer to
Log Messages" (page
Unexpected error (messages with the error code
81001001 or 81001002)
For details of errors, refer to
sages" (page
Consumable Shown when a consumable part is near or has reached its
Alerts replacement time.
Immediately after the Central Admin Server starts up, the operating status of
the registered scanners is shown as "Unreported". In this case, the status of
each scanner will be updated when one of the following occurs:
A scanner is logged in/out
The scanner power is turned on, or it is resumed from standby mode
The scanner power is turned off, or it is set to standby mode
Description
"E.1.3 Alert Monitor System
524).
"E.1.2 System Log Mes-
518).
) is