Fujitsu iScanner fi-6010N Operator's Manual page 107

ATTENTION
4. Enter a user name and password.
User name and password can only be set if the [On] button was selected in
Field Name
User Name
Password
Even if the system environment allows the use of other characters in an
HINT
LDAP password, only those specified above may be used in an automatic
login password.
The scanner follows the Active Directory user name format when authenticating the user
login.
When the "Server Type" of the LDAP server is "Active Directory" or "Active Direc-
tory Global Catalog"
User Name Format
SAM Account Name
Does not contain a "@"
User Principal Name
Contains a "@"
4.6 Using the System Settings Menus
The automatic login setting is applied after the scanner is restarted or
resumed from standby mode.
If Central Admin is enabled in a scanner for which automatic login is
enabled, when the scanner is started or resumed from standby mode,
preference is given to checking for available scanner settings, add-in
installs and system settings in the Central Admin Server, over auto-
matic login. If scanner settings, add-in installs or system settings are
available, they are applied to the scanner. However, if the number of
scanners connecting to the Central Admin Server exceeds the maxi-
mum number possible, the processes is skipped, and automatic login
is performed. Updates will be applied when a scanner is logged out,
or when next started or resumed from standby mode.
User names may be up to 64 characters long.
All alphanumerics (case sensitive) and some symbols are allowed.
User names may not start with a "@" or ".".
The following symbols cannot be used:
/ \ [ ] : ; | = , + * ? < > "
Passwords may be up to 256 characters long, and all alphanumerics
(case sensitive) and symbols are allowed.
Authenticate the user login name (sAMAccountName).
Example: user
Authenticate the user login name (userPrincipalName).
Example: user@example.com
fi-6010N Network Scanner Operator's Guide
Description
Authentication Process
Step 3.
4
69