Setting The Network Printers - Fujitsu iScanner fi-6010N Operator's Manual

4.7.13 Setting the Network Printers

Set a printer connected to the network.
The procedure for setting a network printer is as follows.
1. Check the printer driver.
For more details, refer to
2. Set the printer properties.
For more details, refer to
3. Register the network printer.
Up to 100 network printers can be registered.
A network printer can be registered in one of the following ways.
Network Tree
Select a network printer from the network tree.
For more details, refer to
Network Path
Directly enter the network printer path name.
For more details, refer to
ATTENTION
"Checking the Printer Drivers" (page
"Setting the Printer Properties" (page
"Registering a Network Printer (Network Tree)" (page
"Registering a Network Printer (Network Path)" (page
Be sure to read the printer manual beforehand for information about
setting a printer, adding a network printer, and other cautions.
If the drive on which the spool folder for the print server exists does not
have enough free space, printing will stop. Make sure that there is enough
space in the drive before printing.
Do not set a virtual printer.
If a printer connected to different print servers is to be registered as a net-
work printer multiple times, the software version of the driver should be the
same on each print server. If the software version of the printer driver dif-
fers, printing errors may occur.
4.7 Using the Network Settings Menus
120).
121).
fi-6010N Network Scanner Operator's Guide
124).
4
127).
119