User Log - Fujitsu iScanner fi-6010N Operator's Manual

Network scanner
Hide thumbs Also See for iScanner fi-6010N:
Table of Contents

Advertisement

E.2.3 User Log
Code
00000000
12010001
12010002
12010005
Message
---------------------------
Scanned data size exceeded
maximum size allowed for e-
mail attachments.
Could not connect to server
when sending e-mail.
e-Mail size exceeded maximum
e-mail size allowed by the
SMTP server.
Action
No action required.
Try the following:
Reduce the number of pages to be
scanned and send the e-mail in separate
parts.
Select a higher compression level and
try again.
"6.9.9 Compression" (page 387)
If the problem persists, contact a system
administrator to check the "Maximum
Attachment Size" setting.
"4.7.11 Setting the e-Mail Server (SMTP
Server)" (page 116)
Try the following:
Check that the LAN cable of the scanner
and SMTP server is connected properly.
Contact a system administrator to check
that the scanner IP address and SMTP
server settings are correct.
"8.3 Network Connection
Troubleshooting" (page 458)
Contact a system administrator to check
that the SMTP server is working
properly.
Contact a system administrator to check
the maximum e-mail size allowed by the
SMTP server.
fi-6010N Network Scanner Operator's Guide
E
573

Advertisement

Table of Contents
loading

Table of Contents