[Back] Button - Fujitsu iScanner fi-6010N Operator's Manual

In the following cases, update modules cannot be uploaded.
The module type is either a system or security option, and the same or upgraded module
version has already been registered
For an installed option update module, the same update module is already uploaded
System Update Module
Select the [Browse] button to specify the update module file.
Select the [Upload] button to upload the update module.
Issue an Update Call
Select the checkbox to issue an update call.
When the checkbox is selected, even if a scanner is not started or logged in to, the update
module is sent and applied to the scanner according to the Scanner Notification Schedule.
However, if the update is released while logged in to a scanner, the update will be applied
after logged out. If any other available updates are pending, those are also applied at the
same time.
Scanner Notification Schedule
Sets the schedule to notify update module.
Now
Issues a call immediately.
Later
Specifies the date and time to issue a call.
The default value is 00:00 of the following day. The value can be specified within the range
between the current time and a month later.
The scanner notification schedule uses the Central Admin Server timezone.
ATTENTION
[Register] button
Registers the uploaded update module.
When a new system update is available, it will only be installed in a scanner if
HINT
the new version is higher than the current version. Targeted scanners are
restarted after the new system update has been installed.
Pending updates are performed in the following order:
1. System Updates
2. Add-in Installs
3. Scanner Settings

■ [Back] button

Returns to the Central Admin Console main window.
When issuing a call, set a time that does not conflict with that set for
"Software Update Time-Period Restrictions" on the "Central Admin
Server Settings" window.
fi-6010N Network Scanner Operator's Guide
5.9 Updating the System
5
267