Fujitsu iScanner fi-6010N Operator's Manual page 111

3. If desired, set a sub-folder in which to save the scanned data.
If none of the Sub-Folder buttons is selected, the scanned data will be saved in the des-
ignated network or SharePoint folder.
If a Sub-Folder button is selected, the scanned data will be saved in a sub-folder of the
network folder or SharePoint folder, with this sub-folder being created if it does not
already exist.
If the [Scanner Name] button is selected
The sub-folder will be named after the scanner used for the scan.
If the [User Name] button is selected
The sub-folder will be named after the user who is logged in when the scan is per-
formed.
If the [Date] button is selected
The sub-folder will be named after the date of the scan, using the naming format
selected in the Date Format list.
If multiple buttons are selected, folder names are created in the following
HINT
order.
Scanner Name
User Name
Date
Select the Delimiter [List] button to change the delimiter.
For example, for scanner name "Scanner", user name "user", date
"12312009", delimiter "_", the folder name is "Scanner_user_12312009".
4. Select a file name format.
By default, "Scanner Name" + "Date" + "Time" + "3 digit Seq. Number" is entered.
If the [Prefix] button is selected
The character string entered in the input field is used as the file name.
This may be up to 128 characters long, excluding the following symbols.
\ / : * ? " < > |
For "Scan to SharePoint", the following symbols cannot be used.
~ " # % & * : < > ? { | }
If the [Scanner Name] button is selected
The scanner name is used as the file name.
If the [User Name] button is selected
The name of the currently logged in user is used as the file name.
If the [Date] button is selected
The date of the scan is used as the file name. Select the Date Format [List] button to
change the date format.
If the [Time] button is selected
The start time of the scan is used as the file name.
4.6 Using the System Settings Menus
fi-6010N Network Scanner Operator's Guide
4
73