Setting The E-Mail Server (Smtp Server) - Fujitsu iScanner fi-6010N Operator's Manual

4.7.11 Setting the e-Mail Server (SMTP Server)

ATTENTION
1. Select the [Network Settings] tab on the top menu.
2. Select the [SMTP Server] tab on the left side menu.
The "SMTP Server" screen appears.
3. Enter the SMTP server IP address, host name, or FQDN in the "Address" input field.
For an IP address
The following format should be used xxx.xxx.xxx.xxx (xxx is a value from 0 to
255).
For a host name or FQDN
This may be up to 255 characters long.
If an SMTP server is not required, leave this field blank.
4. Enter a port number from 1 to 65535, to be used by the scanner to communicate with
the SMTP Server.
The default setting is 25.
116
e-Mail cannot be sent if authentication is required by the e-mail server
before sending.