Fujitsu iScanner fi-6010N Operator's Manual page 497

When checking the network connection status of a server by its IP address, the following results
are possible.
Result
"Ping statistics" shows
"Lost=0 (0% loss)"
"Ping statistics" shows
"Lost=4 (100% loss)"
"Ping statistics" shows
"Lost=N (1 to 99% loss)"
"Hardware error"
When checking the network connection status of a server by its host name or FQDN, the following
results are possible.
Result
"Ping statistics" shows
"Lost=0 (0% loss)"
"Ping request could not find
host xxxxxxxxx. Please
check the name and try
again."
"Ping statistics" shows
"Lost=4 (100% loss)"
"Ping statistics" shows
"Lost=N (1 to 99% loss)"
"Hardware error"
8.3 Network Connection Troubleshooting
None
Check that the ping target IP address is correct.
If the ping target IP address is correct, refer to
connect to a server using its IP address" (page 463)
ther solutions.
There may be a quality problem with the LAN cable.
Replace the LAN cable and try again.
In "4.7.18 Checking the Network Operating Status" (page
152), change the [Link Speed/Duplex Mode] from "Auto-
Negotiation" to a fixed mode.
The LAN cable may have become disconnected during the
Ping test. Check the status of the LAN cable and try again.
None
Check that the ping target host name or FQDN is correct.
Check that the DNS server or WINS server settings are cor-
rect.
If the ping target host name or FQDN is correct, refer to
"Failure to connect to a server using its host name or FQDN"
(page 465) for further solutions.
Check that the ping target host name or FQDN is correct.
In "4.7.18 Checking the Network Operating Status" (page
152), change the [Link Speed/Duplex Mode] from "Auto-
Negotiation" to a fixed mode.
There may be a quality problem with the LAN cable.
Replace the LAN cable and try again.
In "4.7.18 Checking the Network Operating Status" (page
152), change the [Link Speed/Duplex Mode] from "Auto-
Negotiation" to a fixed mode.
The LAN cable may have become disconnected during the
Ping test. Check the status of the LAN cable and try again.
fi-6010N Network Scanner Operator's Guide
Action
"Failure to
Action
for fur-
8
459