Turning The Power On/Off; Turning The Power On - Fujitsu iScanner fi-6010N Operator's Manual
Network scanner
Hide thumbs
Also See for iScanner fi-6010N:
- Operator's manual (649 pages) ,
- Setup manual (93 pages) ,
- Getting started manual (45 pages)
Table of Contents
Advertisement
2.1
Turning the Power On/Off
■ Turning the Power On
AUTION
1. Press the startup button.
After the system starts up, the "Login" screen appears.
ATTENTION
24
Do not move or shake the scanner when it is turned on.
This can damage the rotating hard disk drive and cause data to be lost.
After turning the power off, wait for at least 10 seconds before turning the
power back on again.
Startup button
Advertisement
Table of Contents
Troubleshooting
