Fujitsu iScanner fi-6010N Operator's Manual page 509

Problem
Multifeed errors Do the documents satisfy the condi-
occur frequently. tions given in
ments" (page
Has the document been loaded cor-
rectly into the ADF paper chute?
Is the document stack more than
5mm thick?
Is the pad assy dirty?
Is the pad assy worn out?
Paper is not fed into Do the documents satisfy the condi-
the scanner. tions given in
(Pick errors are fre- ments" (page
quent or document
Is the pick roller dirty?
feed stops midway)
Is the pick roller worn out?
Is there any foreign matter in the
document feed path?
Scanned data is Are the feed rollers dirty?
elongated.
Shadow on the Are the feed rollers dirty?
leading edge of the
scanned data.
Vertical line on the Are the glass scanner windows dirty?
scanned data.
Scanned data Has the document been loaded cor-
appears skewed or rectly?
distorted.
Quality of scanned Are the glass scanner windows dirty?
data is poor.
Check item
"A.2 Paper Require-
481)?
"A.2 Paper Require-
481)?
fi-6010N Network Scanner Operator's Guide
8.4 Other Troubleshooting
Suggestion
Use documents which satisfy the condi-
tions described in "A.2 Paper Require-
ments" (page 481).
Riffle and realign the document stack,
then load it back into the ADF paper
chute.
Remove sheets from the stack to reduce it
to a thickness of 5mm or less.
Clean the pad assy.
For more details, refer to
the ADF" (page 426).
Replace the pad assy.
For more details, refer to
Parts" (page 436).
Use documents which satisfy the condi-
tions described in "A.2 Paper Require-
ments" (page 481).
Clean the pick roller.
For more details, refer to
the ADF" (page 426).
Replace the pick roller.
For more details, refer to
Parts" (page 436).
Clean the document feed path.
Clean the feed rollers.
For more details, refer to
the ADF" (page 426).
Clean the feed rollers.
For more details, refer to
the ADF" (page 426).
For more details on cleaning the glass
scanner windows, refer to
Scanner Care" (page 423).
Load the document correctly.
Clean the glass scanner windows.
"7.2 Cleaning
"7.6 Replacing
"7.2 Cleaning
"7.6 Replacing
"7.2 Cleaning
"7.2 Cleaning
"Chapter 7
8
471