Fujitsu iScanner fi-6010N Operator's Manual page 578

Screen
Print Server
Authentication
540
Message
Not connected to the network.
Access to network printer was refused.
Number of network path connections
has reached the maximum allowed. No
more may be specified.
Specified user is no longer able to
login to this network printer.
Specified password is no longer valid
for this network printer.
Specified user needs to renew their
password for this network printer.
Access to network printer was refused.
The specified account is currently
locked out.
Access to network printer was refused.
Login is not possible at this time.
Action
Check that the system network is
functioning normally by
performing a ping test from
another machine in the network,
other than the server with network
printer. If the system network is
not operating properly, refer to
"Failure to connect to a server
using its IP address" (page 463)
further solutions.
Contact a server administrator to
find out if an access permit has
been set.
Close unneeded network
connections, then try specifying
the desired network path again.
Try the following:
Login with a different account.
Contact a network
administrator to have the
account validated.
Try the following:
Login with a different account.
Contact a network
administrator to have the
account validated again.
Try the following:
Login with a different account.
Contact a network administrator
to have the password changed.
Contact a network administrator to
have the account unlocked.
Try the following:
Try again when login is
possible.
Contact a network administrator
to have the time setting
changed.
for