Fujitsu iScanner fi-6010N Operator's Manual page 633

Code
7B020023 New user data could not be uploaded
to the server's User Roaming store.
7B020035 Network error occurred while
contacting Central Admin server.
7B020036 Network error occurred while
contacting Central Admin server.
7B020011 Inventory Information acquisition
failed.
Message
fi-6010N Network Scanner Operator's Guide
Action
Refer to Error Code "7B020001"
(page 592).
User roaming data cannot be
updated because the new user data
has not be uploaded to the Central
Admin Server.
Refer to Error Code "7B020001"
(page 592).
The new user roaming data and job
mode settings cannot be used.
To use the user roaming data and
job mode settings, they must be
downloaded from the Central
Admin Server. After dealing with
the error, re-login using Central
Admin Console and try again.
Refer to Error Code "7B020001"
(page 592).
The applied status was not notified
to the Central Admin Server.
The applied status will be notified
to the Central Admin Server the
next time the scanner is restarted,
resumed from standby mode, or
when the user logs out.
Try the following:
Check that physical network
connection to the DHCP server
is functioning correctly.
Check the DHCP server. The
server may not be operating
normally, or the DHCP settings
(restricted number of leases or
MAC address validation) may
be causing invalid IP addresses
to be assigned.
If there are no problems with the
items described above, contact
your FUJITSU scanner dealer or
an authorized FUJITSU scanner
service provider.
E
595