Pre-Maintenance Preparations - Fujitsu fi-6000NS Operator's Manual

6.7

Pre-Maintenance Preparations

Before sending the scanner for maintenance, the user data store and system settings should be
backed up. Refer to the following sections for details:
• "Backing up the User Data Store" from "3.9.1 Maintaining the User Data Store" (page
107)"
• "3.9.2 Maintaining the System Settings" (page 116)
After backing up the user data store and system settings, the original data may be deleted. Refer to
the following sections for details:
If the hard disk is replaced, all settings will revert to their factory default values.
• "Clearing the User Data Store" from "3.9.1 Maintaining the User Data Store" (page 107)"
• "Clearing the System Log" (page 106) from "3.9.2 Maintaining the System Settings" (page
116)
ATTENTION
The user data store may contain private information such as e-mail
addresses or fax numbers, so care should be taken when managing such
data.

6.7 Pre-Maintenance Preparations

Network Scanner fi-6000NS Operator's Guide
6
253