Registered Scanner Settings; Upload & Release A New Set Of Scanner Settings - Fujitsu iScanner fi-6010N Operator's Manual

Network scanner

Hide thumbs Also See for iScanner fi-6010N:

Table of Contents

■ Registered Scanner Settings

Settings Group

Displays the settings group name selected in the "Settings Groups" list.

Current Release

Displays the release date of the currently available scanner settings.

Selecting the [Cancel] button cancels release of the scanner settings.

■ Upload & Release a New Set of Scanner Settings

Uploads scanner settings and issues an update call as needed.

The new set of scanner settings will be released, and applied to the scanners when one of the fol-

lowing occurs:

Scanner is started, or resumed from the standby mode

Scanner is logged out

Scanner is notified of any update modules

Scanner has an automatic update scheduled

Updates can be applied to the scanners that are in power-off or standby mode using Wake-On-

LAN. However, if the update is released while logged in to a scanner, the update will be applied

after logged out.

If scanner settings are already available, the scanner settings are replaced.

If the scanner settings are canceled, checking or changing the settings

contents becomes difficult. Also, editing and viewing of the network print-

ers/folders setting contents on the Job Sequence "Job Mode Settings"

screen, may not be possible. For more details, refer to

a New Set of Job Mode Settings" (page

"Create & Release