Fujitsu iScanner fi-6010N Operator's Manual page 626

Screen
System
Updates
Scanner
Settings/
Job Mode
Settings
Import
Scanner
Settings
588
Message
File format is not valid.
Specified file does not exist or is
empty.
A date/time within one month from
now must be specified.
A date/time within one month from
now must be specified.
File must be specified.
The same or a newer system update
has already been uploaded.
The same Add-in install module has
already been uploaded.
Cannot open the Setting window.
It may be being accessed by another
user.
Specified scanner settings file could
not be found or could not be uploaded.
Scanner settings could not be
imported. Specified file contains
unsupported data.
Action
Specify a valid file.
Specify a valid update file. The
error may also occur if the
authority to access the file does not
exist.
Specify a valid update call date/
time.
Enter a valid date/time.
Specify a file, and try again.
No action required.
No action required. However, to
upload the same version of the
Add-in install module again, first
cancel the currently uploaded file.
Another user may be editing job
mode settings or scanner
configuration settings. Wait the
other user to finish the operation,
and try again.
Try the following:
Check the scanner settings to be
imported.
Try importing again.
Check that a network error did
not occur while processing the
import, and that the status of the
network is "transmitting".
The system versions of the import
target scanner and import source
scanner are incompatible.
Update the target scanner's system
software.
"4.10.3 Updating the Scanner's
System Software" (page 175)