Warning Label; Screen Examples In This Manual; Safety Precautions - Fujitsu iScanner fi-6010N Operator's Manual

Warning Label

ATTENTION

Screen Examples in This Manual

The screen examples in this manual are subject to change without notice in the interest of product
improvement. If the actual displayed screen differs from the screen examples in this manual, operate
by following the actual displayed screen while referring to the User's Manual of the scanner
application you are using.
The screen examples in this manual are of Windows Vista.

■Safety Precautions

This manual describes important details for ensuring the safe and correct use of this product.
Thoroughly read this manual before you start to use this product. In particular, be sure to read and fully
understand the Safety Precautions described in this manual before you use this product.
Also, store this manual in a safe place so that it can be easily referred to during use of this product.
ARNI N G
Do not damage the AC cable.
A damaged AC cable may cause fire or electric shock. Do not place heavy objects on
AC cables, or pull, bend, twist, heat, damage or modify AC cables.
Do not use damaged AC cables or power plugs, or install any cables or power plugs to
loose wall sockets.
Use only specified AC cables and connector cables.
Use only specified AC cables and connector cables. Failure to use the correct cables
might cause electric shock and/or equipment failure.
Please do not use the AC cable provided with this scanner for other devices, since this
might cause equipment failure and other troubles or an electric shock.
xxx
High Temperature
The glass scanner windows surface inside the ADF becomes hot when the
scanner is used. Be careful not to touch the surface of the glass scanner
windows.
Do NOT remove from the scanner, stain or scratch the warning labels.