Loading Documents Using A Carrier Sheet - Fujitsu iScanner fi-6010N Operator's Manual

6.1.2 Loading Documents Using a Carrier Sheet

A Carrier Sheet is a plastic sheet specifically used for loading non-standard documents onto the
scanner. It allows you to scan documents that cannot be scanned in the regular way. Also, docu-
ments larger than A4 size, such as A3 and B4, can be scanned by folding in half, inserting into the
Carrier Sheet, and scanning in duplex mode. The scanned images will be merged output as one
page. You can also merge both front and back side images of a document smaller than A4 size to
output a double-page spread image.
ATTENTION
1. Fold the sheet to be scanned in half.
Fold the sheet tightly and smooth out the crease. Otherwise, the sheet may be skewed during
scanning.
2. Open the Carrier Sheet and insert the document.
Align the fold with the right edge of the Carrier Sheet so that the document fits into the
Carrier Sheet at the upper corner.
When using a Carrier Sheet, set the size of the scanned document to be out-
put. For more details, refer to
When a Carrier Sheet is used for scanning, continuous scanning is not possi-
ble. Scan one page at one time.
6.1 Loading Documents
"6.9.1 Carrier Sheet" (page
fi-6010N Network Scanner Operator's Guide
372).
301
6