Fujitsu iScanner fi-6010N Operator's Manual page 27

Use in High-safety Applications
This product has been designed and manufactured on the assumption that it will be used in office,
personal, domestic, regular industrial, and general-purpose applications. It has not been designed and
manufactured for use in applications (simply called "high-safety applications" from here on) that
directly involve danger to life and health when a high degree of safety is required, for example, in the
control of nuclear reactions at nuclear power facilities, automatic flight control of aircraft, air traffic
control, operation control in mass-transport systems, medical equipment for sustaining life, and
missile firing control in weapons systems, and when provisionally the safety in question is not
ensured. The user should use this product with adopting measures for ensuring safety in such high-
safety applications. PFU LIMITED assumes no liability whatsoever for damages arising from use of
this product by the user in high-safety applications, and for any claims or compensation for damages
by the user or a third party.
About the Use of Mercury
Lamp(s) inside this product contain mercury and must be recycled or
H
disposed of according to local, state, or federal laws.
g
To avoid unexpected injury, read the following carefully.
Doing the following actions may result in serious personal injuries:
Do not lick or consume the substance contained in the lamp.
Do not incinerate, crush, or shred the lamps or scanner parts.
Do not breathe the chemical liquid contained in the scanner lamps.
LCD Peculiarities
The LCD backlight is a fluorescent tube that contains some mercury.
Be aware that neither of the following is considered a fault.
Despite the fact that the latest advanced technology has been used to produce the scanner's
TFT color LCD's, the large number of pixels involved means that an occasional (always-on)
bright dot or (always-off) dark dot may be visible.
The characteristics of the LCD mean that there may be some variation in hue and intensity of
colors across the screen.
Replacing Batteries
In order to retain data such as BIOS information, this product has a battery (CMOS RAM battery) on
board.
ARNI N G
Do not replace the battery yourself, as there is a risk of explosion if the
wrong type is used. Please contact your maintenance engineer in charge
when the battery runs low.
Do not touch the battery. Never install or remove the battery by yourself.
Doing so may cause electric shock or static electricity which can damage
the device.
fi-6010N Network Scanner Operator's Guide xxv