Audit Log Export Command Messages - Fujitsu iScanner fi-6010N Operator's Manual

E.3.5 Audit Log Export Command Messages
Code
7A050010
7A050012
7A050014
7A050015
7A050016
Message
iScanner Central Admin is not
installed.
Error message details: XXXXXXXXXX
Audit log export failed.
Error code details: XXXXXXXXXX
Error message details: XXXXXXXXXX
Command is already running.
Error has occurred.
Error message details: XXXXXXXXXX
Length of specified folder path
exceeds the maximum allowed.
Check whether or not the Central
Admin Server is installed
correctly. Check whether the
command is being executed with
administrative privileges for the
computer.
Confirm the error message, and try
the following:
Check that there is enough free
disk space in the destination
(export-to) folder.
Check that the destination
(export-to) folder is specified
correctly.
Check that the destination
(export-to) folder, the
destination (export-from)
folder, and log file have write
access.
Check that there is not a file of
the same file name without
write access in the destination
(export-to) folder.
Check that the audit log that
failed to be exported is not
being used in another
application.
Try again after the command
execution is completed.
An unexpected error occurred.
Contact your FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider.
The copy destination folder path
length specified in the command
line exceeds 180 bytes. Specify a
copy destination folder path that is
no longer than 180 bytes.
fi-6010N Network Scanner Operator's Guide
Action
607
E