[Export Config] Button; Filter Conditions - Fujitsu iScanner fi-6010N Operator's Manual

■ [Export Config] button

Shows the "Save As" window to specify a file to export scanner configuration.
A screen to confirm whether or not to export the scanner configuration will be displayed directly
after the [Export Config] button is selected.
[Include detailed scanner information] checkbox
Select this checkbox to output all scanner information.
[Add configuration item titles] checkbox
Select this checkbox to add item titles to the first column of the scanners configuration file.
For details on the format of the scanner configuration file to be exported, refer to
Configuration File Format (for Importing)" (page

■ Filter Conditions

Filters the scanners displayed in the scanner list.
Scanner Name
Enter a part of or entire scanner name of the scanner to be filtered.
This may be up to 15 characters long.
IP Address
Enter a part of or entire IP address of the scanner to be filtered.
This may be up to 15 characters long.
Settings Group
Select the settings group of the scanner to be filtered.
The default is "(All)".
Add-in Group
Select the Add-in group of the scanner to be filtered.
The default is "(All)".
Comment
Enter a part of or entire comment on the scanner to be filtered.
This may be up to 64 characters long. Line-feed cannot be used.
Status
Select the operating status of the scanner to be filtered.
The default is "(All)".
[Refresh List] button
Refreshes the list by filtering using the entered filtering conditions.
258
491).
"B.2.1 Scanner