Scanner Settings (Touch Screen); Setting Items - Fujitsu fi-7300NX Operator's Manual

Scanner Settings (Touch Screen)

This section explains how to use the touch screen to configure the scanner settings.

Setting Items

The scanner settings can be changed in [Scanner Settings] on the screen that appears when you press
lower right of the touch screen.
This section shows a list of setting items that you can configure.
Some setting items can also be configured from the Software Operation Panel. For details, refer to
(Software Operation Panel) (page
ATTENTION
To change the scanner settings, the administrator password is required. The default password is "password".
Change the administrator password to prevent the settings from being changed by other users.
Also, change the administrator password regularly.
The administrator password can be changed in the screen that appears in the following procedure:
→ [Scanner Settings] → [Admin Password]
Setting Items
How to connect (page 219)
Power Management
(page 220)
Scanner Name (page 222)
Network (page 223)
241).
Startup mode (page 220)
Power Save Mode (page
220)
Power Button (page 220)
Wi-Fi (page 223)
Wired LAN (page 224)
Server (page 224)
Network Encryption (page
226)
216
Description
Specify a connection method for the scanner.
Specify a startup mode for the scanner.
You can specify the waiting time for the scanner to
automatically enter power saving mode or to be
automatically turned off if it is left on for a certain
period of time without being used.
Specify whether or not to turn on/off the scanner by
pressing the [Power] button on the scanner.
Set a scanner name.
Configure the settings for Wi-Fi.
Configure the settings for wired LAN.
Configure the settings for a server, which is to be
connected to the scanner.
Specify whether to encrypt network communications.
in the
Scanner Settings