Scanner Settings (Touch Screen); Setting Items - Fujitsu PA03768-B005 Operator's Manual

Scanner Settings (Touch Screen)

This section explains how to use the touch screen to configure the scanner settings.
HINT
Some setting items can also be configured from the Software Operation Panel. For details, refer to
Settings (Software Operation Panel) (page

Setting Items

The scanner settings can be changed in [Scanner Settings] on the screen that appears when you press
lower right of the touch screen.
This section shows a list of setting items that you can configure.
ATTENTION
To change the scanner settings, the administrator password is required. The default password is "password".
Change the administrator password to prevent the settings from being changed by other users.
Also, change the administrator password regularly.
The administrator password can be changed in the screen that appears in the following procedure:
→ [Scanner Settings] → [Admin Password]
Setting Items
How to connect (page 223)
Power Management
(page 224)
Scanner Name (page 226)
Scanner Code (page 226)
Network (page 227)
248).
Startup mode (page 224)
Power Save Mode (page
224)
Power Button (page 224)
Wi-Fi (page 227)
220
Description
Specify a connection method for the scanner.
Specify a startup mode for the scanner.
You can specify the waiting time for the scanner to
automatically enter power saving mode or to be
automatically turned off if it is left on for a certain
period of time without being used.
Specify whether or not to turn on/off the scanner by
pressing the [Power] button on the scanner.
Set a scanner name.
Specify whether or not to issue a scanner code.
If the "PaperStream NX Manager" setting is enabled, a
scanner code can be used when scanning with a user
application on a computer or mobile device.
Configure the settings for Wi-Fi.
Scanner
in the