Scanner Settings - Fujitsu fi-7800 Operator's Manual

Scanner Settings

● When you use the [Scan/Pause] button
No particular setting is required.
→ The specified application starts when the [Scan/Pause] button is pressed.
● [Send to] button
In the [Main Menu] of the operator panel, change the setting number for the [Send to] button which is
displayed on the LCD.
Match the number with the scanner button event configured in the computer ([Send to 01] to [Send to 50]).
For instance, display "F02" in the LCD's indicator to execute an event configured for [Send to 02].
→ The specified application starts when the [Send to] button is pressed.
HINT
● For more details about the operator panel, refer to
● For information on how to change the setting number for [Send to] button, refer to
Selection (page 96).
How to Use the Operator Panel (page
110
Various Ways to Scan
72).
How to Use Function