Concluding Steps - Fujitsu PRIMERGY TX140 S2 Upgrade And Maintenance Manual

Figure 175: Removing the TPM spacer
Ê Using a small pair of combination pliers, press together the hooks on the
TPM spacer (1, see close-up) and remove it from the system board (2).
I
If the TPM is to be replaced, the TPM spacer may remain on the
system board.

14.4.2.3 Concluding steps

"Reassembling" on page 58
Ê
"Connecting the server to the mains" on page 67
Ê
"Switching on the server" on page 68
Ê
TX140 S2
Upgrade and Maintenance Manual
System board and components
269