Switching On The Server - Fujitsu PRIMERGY TX140 S2 Upgrade And Maintenance Manual

Basic hardware procedures
4.7

Switching on the server

V
CAUTION!
Before switching on the server, make sure the top / side cover is
●
closed. In order to comply with applicable EMC regulations
(regulations on electromagnetic compatibility) and satisfy cooling
requirements, the server must not run while the top / side cover is
removed.
After connecting all power cords, wait at least 60 seconds before
●
pressing the On/Off button.
Follow the safety instructions in chapter
●
page 31.
Ê Press the On / Off button to start up the server.
Ê Ensure that the power-on indicator above the On / Off button is lit green.
Ê Perform the required procedures described in the concluding steps of each
upgrade or maintenance task.
68 Upgrade and Maintenance Manual
"Important information" on
TX140 S2