Replacing An Fbu; Preliminary Steps; Removing The Defective Fbu - Fujitsu PRIMERGY TX140 S2 Upgrade And Maintenance Manual

Expansion cards and backup units
9.5.6

Replacing an FBU

Upgrade and Repair Unit
(URU)
Tools: tool-less
V
CAUTION!
Do not throw FBUs into the trash can. Batteries must be disposed of in
accordance with local regulations concerning special waste.
For further safety information, please refer to section
protection" on page
9.5.6.1

Preliminary steps

"Locating the defective server" on page 43
Ê
"Disabling SVOM boot watchdog functionality" on page 70
Ê
"Shutting down the server" on page 46
Ê
"Disconnecting the server from the mains" on page 46
Ê
"Getting access to the component" on page 47
Ê
"Removing the fan module" on page 151
Ê
9.5.6.2

Removing the defective FBU

Ê Remove the FBU with the holder as described in section
FBU" on page
202
41.
199.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Environmental
"Removing an
TX140 S2