Table of Contents
Advertisement
Appendix
17.4
Minimum startup configuration
Field Replaceable Units (FRU)
If the server does not start up or other problems occur, it may be necessary to
take the system down to its most basic configuration in order to isolate the
defective component.
The minimum startup configuration consists of the following components and
cables:
Component
System board
CPU with CPU heat sink
1 memory module
Front panel module
Power supply unit
Table 9: Minimum startup configuration - components
Cable
Front panel cable
Power cable
Table 10: Minimum startup configuration - cables
"Shutting down the server" on page 46
Ê
"Disconnecting the server from the mains" on page 46
Ê
Ê Take the system down to its minimum startup configuration.
"Connecting the server to the mains" on page 67
Ê
Ê Connect a keyboard, mouse and display to the server.
"Switching on the server" on page 68
Ê
330
Notes
no TPM, UFM or expansion cards installed
installed in DIMM slot 1A
Notes
Upgrade and Maintenance Manual
TX140 S2
Advertisement
Table of Contents
