Removing The Pci Slot Bracket - Fujitsu PRIMERGY TX140 S2 Upgrade And Maintenance Manual

9.4.1.2

Removing the PCI slot bracket

Figure 98: Removing the PCI slot bracket
Ê Fold up the locking handle on the slot bracket clamp (1).
Ê Press down on the slot bracket clamp to disengage it (2).
Ê Remove the slot bracket clamp (3).
Ê Remove the slot bracket (4).
V
CAUTION!
Keep the slot bracket for further use.
Always replace slot brackets into unused PCI slot openings to comply
with applicable EMC regulations and satisfy cooling requirements.
TX140 S2
Upgrade and Maintenance Manual
Expansion cards and backup units
177