List Of Used Cables - Fujitsu PRIMERGY TX140 S2 Upgrade And Maintenance Manual

Cabling
16.1

List of used cables

I
The numbers in the cable list correspond to those shown in the cabling
plans.
No. Name
1 Front panel cable
2 Front USB cable
3 Intrusion switch cable T26139-Y3922-V121 from server front to system board
HDD / ODD power
4
cable
5 ODD SATA cable
6 SAS / SATA cable
7 System power cable
Power supply unit
8
signal cable
If BBU installed:
9
BBU cable
If FBU installed:
10
FBU adapter cable
PCI riser card power
11
cable
SAS backup drive
12
power / data cable
13 USB 2.0 cable
14 USB 3.0 cable
Table 8: List of used cables
300
Cable number
T26139-Y4015-V301
T26130-Y3999-V301
T26139-Y4012-V502
T26139-Y3928-V205 from optical disk drive to system board
T26139-Y3963-V103
T26139-Y3952-V611
T26139-Y3956-V2
T26139-Y3987-V2
T26139-Y4032-V3
T26139-Y4029-V202 from PCI riser card to HDD backplane
T26139-Y3969-V401
T26139-Y3973-V2
T26139-Y4039-V80
Upgrade and Maintenance Manual
Routing
from front panel module to system
board
from front panel module to system
board
HDD backplanes and accessible
drives to system board
from SAS / SATA backplane to system
board or SAS controller
from power distribution board to
system board
from power distribution board to
system board
from BBU to RAID controller
from FBU to RAID controller
from SAS backup drive to HDD
backplane
from USB backup drive to system
board
from USB backup drive to USB 3.0
interface card
TX140 S2