Replacing The Ufm; Preliminary Steps; Removing The Defective Ufm - Fujitsu PRIMERGY TX140 S2 Upgrade And Maintenance Manual

14.3.3 Replacing the UFM

Field Replaceable Unit
(FRU)
Tools: – Phillips PH1 / (+) No. 1 screw driver
– combination pliers and flat nose pliers

14.3.3.1 Preliminary steps

"Disabling BitLocker functionality" on page 69
Ê
"Disabling SVOM boot watchdog functionality" on page 70
Ê
"Locating the defective server" on page 43
Ê
"Shutting down the server" on page 46
Ê
"Disconnecting the server from the mains" on page 46
Ê
"Getting access to the component" on page 47
Ê

14.3.3.2 Removing the defective UFM

Ê Remove the UFM from the system board as described in section
the UFM" on page
Ê The UFM spacer remains on the system board.
TX140 S2
257.
Upgrade and Maintenance Manual
System board and components
Hardware: 10 minutes
Software: 5 minutes
"Removing
259