Replacing Accessible Drives; Preliminary Steps; Removing The Defective Accessible Drive - Fujitsu PRIMERGY TX140 S2 Upgrade And Maintenance Manual

Ê If applicable, "Verifying and configuring the backup software solution" on
page 82
"Enabling BitLocker functionality" on page 90
Ê
12.4

Replacing accessible drives

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver (for installing mounting brackets)

12.4.1 Preliminary steps

"Disabling BitLocker functionality" on page 69
Ê
"Locating the defective server" on page 43
Ê
"Removing backup and optical disk media" on page 72
Ê
"Verifying and configuring the backup software solution" on page 73
Ê
"Shutting down the server" on page 46
Ê
"Disconnecting the server from the mains" on page 46
Ê
"Getting access to the component" on page 47
Ê
"Removing the rack front cover" on page 52
Ê
front cover" on page 56
I
Removing the front cover is not required in order to replace an
accessible drive.

12.4.2 Removing the defective accessible drive

Ê Remove the accessible drive as described in section
accessible drive" on page
Ê If applicable, remove existing mounting brackets from the defective backup
drive.
TX140 S2
(tower server)
240.
Upgrade and Maintenance Manual
Accessible drives
Hardware: 15 minutes
(rack server) or "Removing the
"Removing an
243