Fujitsu PRIMERGY TX140 S2 Upgrade And Maintenance Manual page 226

Processors
V
CAUTION!
– Ensure that the screws on the heat sink are properly seated on the
threaded holes.
– Ensure that the heat sink cooling fins match the direction of the
airflow!
Figure 136: Installing the heat sink (B)
Ê Fasten the four captive screws on the heat sink in a crossover pattern (screw
torque: 0.6 Nm, not applicable for the Japanese market) (1-4).
226 Upgrade and Maintenance Manual
TX140 S2