Installing A 3.5-Inch Hdd Module - Fujitsu PRIMERGY TX140 S2 Upgrade And Maintenance Manual

Ê While keeping the locking tabs pressed, pull the dummy module out of its
bay (2).
V
CAUTION!
Save the dummy module for future use.
Always replace dummy modules into unused HDD bays to comply
with applicable EMC regulations and satisfy cooling requirements.
7.3.3.3

Installing a 3.5-inch HDD module

Figure 54: Opening the 3.5-inch HDD module locking lever
Ê While pressing down on the locking button (1) fold up the lever (2).
TX140 S2
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
135