Installing The Fbu In The Holder - Fujitsu PRIMERGY TX140 S2 Upgrade And Maintenance Manual

Expansion cards and backup units
9.5.2.3

Installing the FBU in the holder

Figure 109: Installing the FBU in the holder (A)
Ê At a slight angle, fit the FBU under the right retaining bracket on the holder.
Ê Push down the FBU until it locks in place.
Figure 110: Installing the FBU in the holder (B)
Ê Ensure that the FBU is properly seated in the holder.
192 Upgrade and Maintenance Manual
TX140 S2