Installing The New Front Panel Module - Fujitsu PRIMERGY TX140 S2 Upgrade And Maintenance Manual

Figure 156: Removing the front panel cable
Ê Remove the front panel cable from the front panel module.

13.1.3 Installing the new front panel module

Ê Connect the front panel cable to the front panel module (see figure 156).
Figure 157: Installing the front panel module
Ê Insert the front panel module into its installation bay and carefully push in
until the front screw hole on the front panel frame lines up with the centering
pin on the locking bar (1).
Ê Close the locking bar (2) until it locks in place (3).
TX140 S2
Upgrade and Maintenance Manual
Front panel module
249